1998 Ford Taurus Fuel Pump Module Removal Installation
download Removal 1. Remove fuel tank (9002) as described. 2. Remove any dirt that has accumulated around fuel pump module retaining flange. 3. Turn fuel pump module locking retainer ring...
View Article1997 Ford Explorer Water Pump Removal Installation
download 1. Remove the fan shroud; refer to Section 303-03 . 2. Drain the cooling system; refer to Section 303-03 . 3. Remove the accessory drive belt. 1. Turn the tensioner pulley clockwise. 2. Remove...
View Article1995 Nissan Maxima Water Pump: Service and Repair REMOVAL AND INSTALLATION
download CAUTION: When removing water pump assembly, be careful not to get coolant on drive belt. Water pump cannot be disassembled and should be replaced as a unit. After Installing water pump,...
View Article2003 Chevy TrailBlazer Water Pump Replacement (4.2L Engine)
download Tool Required J 41240 Fan Clutch Wrench Removal Procedure 1. Drain the coolant. 2. Remove the fan and shroud. 3. Remove the drive belt. 4. Using the J 41240, secure the water pump pulley and...
View Article2003 Buick Rendezvous Water Pump Replacement Removal Procedure
download 1. Drain the cooling system until the coolant is below the level of the water pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove...
View Article2004 Mazda 6 i WATER PUMP DRIVE BELT Removal Installation
download WATER PUMP DRIVE BELT 1. Verify that the water pump drive belt auto tensioner indicator mark does not exceeds the limit. ? If it exceeds the limit, replace the water pump drive belt. (See...
View Article2004 Chevrolet Malibu Water Pump Replacement Removal Procedure
download Water Pump Replacement (L61) Tools Required J 43651 Water Pump Holding Tool Removal Procedure 1. Drain the coolant. 2. Remove the thermostat housing pipe-to-cylinder bolt near the front of the...
View Article1995 Mercury Villager Water Pump Removal Installation
download 1. Drain the cooling system. Refer to Section 03-03 for the procedure. 2. Disconnect the battery ground cable (14301) . 3. Remove the generator drive belt, water pump and power steering pump...
View Article1994 Mercury Villager Water Pump REMOVAL AND INSTALLATION
download Water Pump Removal 1. Drain the cooling system. Refer to Section 03-03. 2. Disconnect the battery ground cable (14301) . 3. Remove the generator drive belt, water pump and power steering pump...
View Article1998 Ford Mustang Water Pump Removal Installation
download 1. Drain engine cooling system. Refer to Section 03-03. 2. Remove upper radiator sight shield (8C291). 3. Disconnect radiator overflow hose (8075) from radiator (8005). Remove bolts retaining...
View Article